####################################################################################################################################################
#
# MRTG template zum Erzeugen einer config-Datei fuer APC SMART-UPS SURT 8000
#
# /usr/bin/cfgmaker --global "WorkDir: /srv/www/htdocs/mrtg/APC" --host-template=/etc/mrtg/APC.template --output /etc/mrtg/APC.cfg community@device
# /usr/bin/mrtg /etc/mrtg/APC.cfg
# /usr/bin/indexmaker --output=/srv/www/htdocs/mrtg/APC/index.html /etc/mrtg/APC.cfg
#
#
#

my $target_name = $router_name . "-capload";

$head_lines .= <<ECHO;

ECHO


$target_lines .= <<ECHO;


YLegend[$target_name]: Percent
ShortLegend[$target_name]: %
Directory[$target_name]: $router_name
Legend1[$target_name]: Battery Capacity
Legend2[$target_name]: Load
Legend3[$target_name]: Max Capacity
Legend4[$target_name]: Max Load
LegendI[$target_name]: Battery Capacity
LegendO[$target_name]: Load
WithPeak[$target_name]: ywm
Unscaled[$target_name]: dwmy
MaxBytes[$target_name]: 110
Options[$target_name]: growright, gauge, nopercent
Title[$target_name]: $router_name Batterie Kapazitaet & Auslastung
Target[$target_name]: 1.3.6.1.4.1.318.1.1.1.2.2.1.0&1.3.6.1.4.1.318.1.1.1.4.2.3.0:$router_connect
PageTop[$target_name]: <H1>$router_name Batterie Kapazitaet & Auslastung</H1>
  <TABLE>
    <TR><TD>System:</TD><TD>$router_name in $html_syslocation</TD></TR>
    <TR><TD>Maintainer:</TD><TD>$html_syscontact</TD></TR>
    <TR><TD VALIGN="top">Description:</TD><TD>$html_sysdescr</TD></TR>
    <TR><TD>Resource:</TD><TD>USV Kapazitaet & Auslastung</TD></TR>
  </TABLE>
ECHO


#
# Temperatur (celsius).
#

my $target_name = $router_name . "-temp";

$head_lines .= <<ECHO;

ECHO


$target_lines .= <<ECHO;


YLegend[$target_name]: deg C
ShortLegend[$target_name]: deg C
Directory[$target_name]: $router_name
Legend1[$target_name]: Batterie-Temperatur (celsius)
Legend2[$target_name]: Umgebungs-Temperatur (celsius)
Legend3[$target_name]: Max Batterie-Temperatur
Legend4[$target_name]: Max Umgebungs-Temperatur
LegendI[$target_name]: Temperatur
LegendO[$target_name]: Temperatur
WithPeak[$target_name]: ywm
MaxBytes[$target_name]: 150
Options[$target_name]: growright, gauge, nopercent
Title[$target_name]: $router_name Temperaturen (Batterie & Umgebung)
Target[$target_name]: 1.3.6.1.4.1.318.1.1.1.2.2.2.0&1.3.6.1.4.1.318.1.1.10.2.3.2.1.4.1:$router_connect
PageTop[$target_name]: <H1>$router_name Batterie- und Umgebungs-Temperatur</H1>
  <TABLE>
    <TR><TD>System:</TD><TD>$router_name in $html_syslocation</TD></TR>
    <TR><TD>Maintainer:</TD><TD>$html_syscontact</TD></TR>
    <TR><TD VALIGN="top">Description:</TD><TD>$html_sysdescr</TD></TR>
    <TR><TD>Resource:</TD><TD>USV Temperaturen</TD></TR>
  </TABLE>
ECHO


#
# Eingang- & Ausgangs-Frequenz.
#

my $target_name = $router_name . "-iofreq";

$head_lines .= <<ECHO;

ECHO


$target_lines .= <<ECHO;


YLegend[$target_name]: Hertz
ShortLegend[$target_name]: Hz
Directory[$target_name]: $router_name
Legend1[$target_name]: Eingangs-Frequenz
Legend2[$target_name]: Ausgangs-Frequenz
Legend3[$target_name]: Max Eingangs-Frequenz
Legend4[$target_name]: Max Ausgangs-Frequenz
LegendI[$target_name]: Eingang Hz
LegendO[$target_name]: Ausgang Hz
WithPeak[$target_name]: ywm
MaxBytes[$target_name]: 100
Unscaled[$target_name]: dwmy
Options[$target_name]: growright, gauge, nopercent
Title[$target_name]: $router_name Eingang- & Ausgangs-Frequenz
Target[$target_name]: 1.3.6.1.4.1.318.1.1.1.3.2.4.0&1.3.6.1.4.1.318.1.1.1.4.2.2.0:$router_connect
PageTop[$target_name]: <H1>$router_name Eingang- & Ausgangs-Frequenz</H1>
  <TABLE>
    <TR><TD>System:</TD><TD>$router_name in $html_syslocation</TD></TR>
    <TR><TD>Maintainer:</TD><TD>$html_syscontact</TD></TR>
    <TR><TD VALIGN="top">Description:</TD><TD>$html_sysdescr</TD></TR>
    <TR><TD>Resource:</TD><TD>UPS Eingang- & Ausgangs-Frequenz</TD></TR>
  </TABLE>
ECHO





#
# Minimum and Maximum AC line voltage.
#

my $target_name = $router_name . "-minmaxline";

$head_lines .= <<ECHO;

ECHO


$target_lines .= <<ECHO;


YLegend[$target_name]: Volts AC
ShortLegend[$target_name]: VAC
Directory[$target_name]: $router_name
Legend1[$target_name]: Minimum Eingangs-Spannung
Legend2[$target_name]: Maximum Eingangs-Spannung
Legend3[$target_name]: Minimum Ausgangs-Spannung
Legend4[$target_name]: Maximum Ausgangs-Spannung
LegendI[$target_name]: Min VAC
LegendO[$target_name]: Max VAC
WithPeak[$target_name]: ywm
MaxBytes[$target_name]: 500
Options[$target_name]: growright, gauge, nopercent
Title[$target_name]: $router_name Minimum & Maximum Eingangs-Ausgangs-Spannung
Target[$target_name]: 1.3.6.1.4.1.318.1.1.1.3.2.1.0&1.3.6.1.4.1.318.1.1.1.4.2.1.0:$router_connect
PageTop[$target_name]: <H1>$router_name Minimum & Maximum Eingangs-Ausgangs-Spannung</H1>
  <TABLE>
    <TR><TD>System:</TD><TD>$router_name in $html_syslocation</TD></TR>
    <TR><TD>Maintainer:</TD><TD>$html_syscontact</TD></TR>
    <TR><TD VALIGN="top">Description:</TD><TD>$html_sysdescr</TD></TR>
    <TR><TD>Resource:</TD><TD>Minimum & Maximum Eingangs-Ausgangs-Spannung</TD></TR>
  </TABLE>
ECHO



#
# Last-reason-on-battery
#

my $target_name = $router_name . "-lrob";

$head_lines .= <<ECHO;

ECHO


$target_lines .= <<ECHO;


YLegend[$target_name]: Reason
ShortLegend[$target_name]:
Directory[$target_name]: $router_name
Legend1[$target_name]: Letzter Batteriebetrieb
Legend2[$target_name]: Letzter Batteriebetrieb
Legend3[$target_name]: Letzter Batteriebetrieb
Legend4[$target_name]: Letzter Batteriebetrieb
LegendI[$target_name]: LROB
LegendO[$target_name]: LROB
WithPeak[$target_name]: ywm
MaxBytes[$target_name]: 11
Unscaled[$target_name]: dwmy
Options[$target_name]: growright, gauge, nopercent
Title[$target_name]: $router_name Letzter Batteriebetrieb
Target[$target_name]: 1.3.6.1.4.1.318.1.1.1.3.2.5.0&1.3.6.1.4.1.318.1.1.1.3.2.5.0:$router_connect
PageTop[$target_name]: <H1>$router_name Letzter Batteriebetrieb</H1>
  <TABLE>
    <TR><TD>System:</TD><TD>$router_name in $html_syslocation</TD></TR>
    <TR><TD>Maintainer:</TD><TD>$html_syscontact</TD></TR>
    <TR><TD VALIGN="top">Description:</TD><TD>LROB Values<BR>
				 	1) No Transfer<BR>
					2) High Line Voltage<BR>
					3) 40% - 100% Line Power<BR>
					4) 0% - 40% Line Power<BR>
					5) <5 Sec Shallow Voltage Sag<BR>
					6) <5 Sec Deep Voltage Sag<BR>
					7) <5 Sec Small Voltage Spike<BR>
					8) <5 Sec Large Voltage Spike<BR>
					9) UPS Self Test<BR>
				   10) Significant Voltage Delta</TD></TR>
    <TR><TD>Resource:</TD><TD>Letzter Batteriebetrieb</TD></TR>
  </TABLE>
ECHO